Popular Arrow Products

assembly only took 7 hours. The manual recommends two people, but I assembled it myself. Some parts were dented. The instruction manual needs a better description on where to place the door sliders. I had to take a portion of the shed apart to place the sliders in the correct location.

the shed is nice looking, but very flemsy. it does serve the purpose though. the instructions could be better. the panels have numbers on them and are referenced in the instruction which help, but the steel parts don't have numbers, so its hard to know how to put them together sometimes.\nbut overall i like the shed and it does what i need it to do, just wish it had more stability.\nthe delivery time was great, i received it before i thought i would.\nthanks for everything. i would order from walmart again.

Just a very thin gauge metal shed. I am a general contractor and it took me all day (9-5) to put this baby together. If you are not handy, don't even try!\nAlso, don't buy the foundation kit that Arrow sells for this. All they are is thin pieces of metal hat channel. It does do the job though and you can't beat the 200 and change price tag.

This is a very time consuming construction. You must follow the (poorly written) instructions to the letter, otherwise you will be undoing your work and redoing it. Takes way too long to put it together. You really need to have a larger concrete base than the shed, because you have to keep moving it to construct it.

The shed was good for the price however, the intructions are far from being great. They need to be better explained and the pictures should demonstrate better how the pieces are to be installed. Definitely the instructions need to be worked on. Other than that the shed is good!

For the price of $99 I cannot complain. It serves the purpose and gives you good ergonomic posture to reduce shoulder and neck fatigue\/discomfort, as well as makes your project go by quicker as the machine is flush with the table. Folds easily and as sturdy as it is while sewing it is pretty lite weight to move around. I had to have the insert cut further out by an inch as the machine I have is a wee bit bigger. All of the above are the pros. The only con I would like to state is that the melamine surface treatment is very thin and the table had spidery hairline cracks on the surface in one corner before I opened the table. It could be because of the stress of shipping. I decided not to return it and if it got worse I would go ahead and cover it with a shelf lining vinyl which will not only cover the cracks but would provide me with a smooth surface reqd. to move quilts and other projects as you sew or free motion embroider. The biggest pro is that it is already assembled..all I had to do was bring it out of the box and plop it open and it was ready to use.

Im so disappointed to have to take this back because it frees up so much shelf space, but it leaks, I tried tightening it, but still leaks.

The slimline design allows for extra room in the refrigerator\nThe spigot does not leak

This product cannot hold a 5 gallon water can above it. Its lid is too small. Extremely dissatisfied with the product..!!!!!

This shed is an excellent shed and is a good size if you want lots of storage. Also it is different than your typical plain white shed and there fore has more character. The shed shipped quickly but unfortunately roof panels and side panels were slighty dented. Customer service from the factory worked well with us to provide additional panels but it was going to take more than a week to get the new panelsshipped. Fortunately the factory is only 3 hours away and the allowed me to pick up the panels the very next day so I could complete the shed during my time off. Some directions were vague and the description of the floor base kit made it difficult to decide if you needed it or not. I hope to get an RMA and return the floor base since it was billed seperate from the building because a wood base was the best option for me.

When we ordered our shed on line, we knew that we wanted a floor inside. The description of the froor kit made it difficult to determine if it was going to be needed or not. To cover my bases I went ahead and ordered a shed with the floor base. It's not really needed and it comes billed separate from the building so I am going to request an RMA and return it if possible this would be my only complaint. A wood floor was my best bet for the location I chose to place my shed.

as a welder\/mechanic who has been in the trades for 35 years, I can not believe this shed took me 2 and1\/2 days.If you read the book before you start it will help, take your time,no short cuts,I placed 3\/4 pressure treated plywood on a gravel patio to start as my foundation, also used 3\/4 cdx plywood for the flooring. also used #8 self tapping\/ self threading screws ( 1\/2 inch) where ever I could place one after the shed was completed, I did not care for the cheap screws that were suggested. If your shed is not level or square your doors will not line up properly, pitch the roof away from the doors if possible and again,take your time.

Looks good and works as advertised which is a rarity these days. Went together easily and just needed a little tweaking ( door leveling, etc.) instructions for which are included. Over all perfect for my needs.

The exterior of box in good condition, but when you open it the pieces had bent ends, tears, rust, and other minor damage. There are enough screws used when putting it together it could drive you nuts. Once you finish assembly, you have a nice storage shed. Shipping should have been free when you are making this type of purchase for the quality of materials you get.

The table is perfect for my Bernina 1530 Quilting Machine and also fits my Bernina 830 for sewing. Great for taking on Auto Train to Florida, as I am a snow bunny