Specifications

• Vehicle Bolt Pattern: 5x4.5 or 5x4.75 (dual Drilled)
• Wheel Bolt Pattern: 5x4.5 or 5x4.75 (dual Drilled)
• Hub Bore: 87.1mm
• Flat Spacers
• Thickness: Each Spacer Measures 1/4" (6mm) Thick

Vehicle Fitments

THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)

• 1952-1954 Ford Crestline
• 1992-2011 Ford Crown Victoria
• 1955-1967 Ford Fairlane
• 1962-1967 Ford Falcon
• 2005-2007 Ford Five Hundred
• 1960-1974 Ford Galaxie
• 1952-1954 Ford Mainline
• 1967-1973 Ford Mustang
• 1994-2014 Ford Mustang
• 2010-2016 Ford Taurus
• 1958-1971 Ford Thunderbird
• 2007-2010 Ford Edge
• 1991-2010 Ford Explorer
• 1991-2011 Ford Ranger
• 1982-1990 Ford Bronco II (Does not fit XLT Model)
• 1984-1992 Lincoln Mark 7
• 1982-2004 Lincoln Town Car
• 2003-2010 Lincoln Aviator
• 1996-2010 Mercury Mountaineer
• 1991-1994 Mazda Navajo
• 1998-2009 Mazda B Series

Installation Information

• REQUIRED that you Check your vehicle compatibility in Product Description BEFORE buying
• Installation should only be performed by a trained professional
• Will NOT WORK with stock length studs. Extended Wheel Studs are ABSOLUTELY NEEDED for proper installation
• Make sure to get 6-8 FULL TURNS of the lug nuts when tightening
• Be sure to torque the lug nuts to manufacturer specifications
• Check and re-torque all lug nuts after 25-50 miles of driving
• Failure to follow proper procedures may cause your lug nuts to come undone while driving
• Perfect for fixing clearance issues if your wheel(s) is hitting your shocks or brake calipers

Additional Information

• This listing is for Spacers Only!
• It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle
• Buyers may need to purchase extended wheel studs. Buyers are responsible for confirming their wheel studs are the proper length
• Bolt Pattern: 5x4.5 or 5x4.75. Hub Bore: 87.1mm. Spacer Thickness: 12mm (1/2 inch)
• No returns or exchange once installed
• ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS